Goods made of coil steel are characterized by small size, large weight and easy rolling. Because the focus point of coil steel is relatively small, for such goods packing, it is necessary to ensure that the goods can not leak at the bottom of the container, which requires us to reinforce personnel to understand the bottom structure of the container, as shown in the figure below:

To add on surface, before packing, strengthening staff shop inside the container will be two to three wooden stare blankly, and insensitive and container bottom Liang Cheng placed upright, the coil into the wood shocked again, added its stress area, greatly reduce the pressure of the coil on the bottom of the container, and ensure that the bottom of the container in the process of hoisting container will not be leakage.

There are two general methods for rolling steel into the box: 1. The forklift truck picks the rolling eye directly into the box; The forklift carried the coil of steel and rolled it into the container. The selection of which packing method should be determined by combining the number of boxes and the case of volumes per box practice. In general, each box packed with 5 pieces of steel coil selection of the second method is more, 6 or more than 6 pieces of steel coil is mostly selected the first method.

Sometimes the steel coil is with a wooden bracket, then there is no need to advance the wood paving before packing, can be directly packing, but when packing, be sure to ensure that the bottom of the steel coil bottom bracket and the bottom beam of the container adhere to the straight direction, to avoid the floor pressure leakage.

The above talk is a few points when the packing needs to pay attention to the local, let's talk about the details of steel reinforcement.